Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nagai, Takayuki; Hasegawa, Takehiko*
JAEA-Research 2023-008, 41 Pages, 2023/12
JAEA-Research-2023-008.pdf:7.52MB
To reduce the risks posed by stored the high-level radioactive liquid waste (HAW), Tokai Vitrification Facility (TVF) is working to produce the HAW into vitrified bodies. With the aim of steady vitrification of HAW in TVF, the vitrification technology section has manufactured a new 3rd melter with an improved bottom structure and is working to verify the performance of this melter. In this study, solidified glass samples were taken from simulated vitrified bodies produced by flowing molten glass during the bottom drain-out test in the operation confirmation of the TVF 3rd melter. And the properties of the surface layer and fracture surface of the vitrified bodies were evaluated by using Raman spectroscopy, synchrotron radiation XAFS measurement, and laser ablation inductively coupled plasma atomic emission spectroscopy (LA ICP-AES) analysis. As a result of measuring the surface layer and fracture surface of the solidified samples produced on an actual scale, a slight difference was confirmed between the properties of the surface layer and those of the fracture surface. Since the chemical composition of these simulated vitrified bodies does not contain platinum group elements, it is expected that the glass structure of solidified glass samples is different from that of the actual vitrified body. However, this sample measuring was a valuable opportunity to evaluate samples produced by using the direct energized joule heating method. The properties of cullet used the operation confirmation of the TVF 3rd melter and the cullet of another production lot were measured and analyzed in the same manner under the measuring conditions of solidified glass samples. As a result, it was confirmed that cullet with different producing histories have different glass structures even with the same chemical composition, and that differences in glass structures remain in the glass samples after melting these cullet.
Nagai, Takayuki; Okamoto, Yoshihiro; Yamagishi, Hirona*; Kojima, Kazuo*; Inose, Takehiko*; Sato, Seiichi*; Hatakeyama, Kiyoshi*
JAEA-Research 2022-008, 37 Pages, 2022/10
JAEA-Research-2022-008.pdf:5.27MB
The local structure of glass-forming elements and waste elements in borosilicate glasses varies with its chemical composition. In this study, borosilicate glass frit and simulated waste glass samples were prepared and the chemical state regarding boron (B), silicon (Si) and waste elements of iron (Fe), cesium (Cs) were estimated by using XAFS measurement in soft X-ray region. Following results were obtained by XAFS measurements of simulated waste glass surfaces after immersion test to investigate the long chemical stability. (1) As the leaching time of glass samples in immersion test passed, the Cs M
, M
-edge XANES spectra disappeared and the Fe L
, L
-edge spectra changed. (2) A new compound was formed on the sample surface after the immersion test, and these changes in the surface state were confirmed by Raman spectroscopy. However, it became difficult to obtain a clear B K-edge XANES spectrum by forming a compound on glass surfaces. The Si K-edge XANES spectra of borosilicate glass frits with different NaO content were measured, and following was confirmed. (1) As the NaO concentration increases in borosilicate glass frit, the K-edge peak of Si shifts to the low energy side. (2) The intensity of the Si K-edge peak is maximum when the NaO content in glass frits was about 7wt%.
Nagai, Takayuki; Okamoto, Yoshihiro; Yamagishi, Hirona*; Ota, Toshiaki*; Kojima, Kazuo*; Inose, Takehiko*; Sato, Seiichi*; Hatakeyama, Kiyoshi*
JAEA-Research 2021-010, 62 Pages, 2022/01
JAEA-Research-2021-010.pdf:6.05MB
The local structure of glass-forming elements and waste elements in borosilicate glasses varies with its chemical composition. In this study, borosilicate glass frit and simulated waste glass samples were prepared and the local structure and chemical state regarding boron(B), oxygen(O), silicon(Si) and waste elements of iron(Fe), cesium(Cs) were estimated by using XAFS measurement in soft X-ray region. Following results were obtained by XAFS measurements of prepared glass frit and simulated waste glass samples: (1) The effect of NaO concentration on B-O coordination structure is greater than that of the waste elements concentration. (2) The height of pre-edge by O K-edge spectrum depends on the concentration of first transition elements such as Fe in glass samples. Following results were obtained by XAFS measurements of simulated waste glass samples after immersion test to investigate the long chemical stability. (1) A new compound was formed on the sample surface after the immersion test, and changes in the surface state were confirmed by Raman spectroscopy. (2) Cs on the sample surface after immersion test dissolves into the leaching solution. The Si K-edge XANES spectra of borosilicate glass frits and simulated waste glass samples included lanthanides oxide were measured, and following was confirmed. (1) As the NaO concentration increases in borosilicate glass frit, the K-edge peak of Si shifts to the low energy side. (2) The peak height of the K-edge of Si differs depending on the kind of lanthanide.
Nagai, Takayuki; Okamoto, Yoshihiro; Yamagishi, Hirona*; Ota, Toshiaki*; Kojima, Kazuo*; Inose, Takehiko*; Sato, Seiichi*; Hatakeyama, Kiyoshi*
JAEA-Research 2020-009, 48 Pages, 2020/09
JAEA-Research-2020-009.pdf:4.53MB
The local structure of glass-forming elements and waste elements in waste glass varies with its chemical composition. In this study, borosilicate glass frit and simulated waste glass samples were prepared and the local structure and chemical state regarding boron (B), oxygen (O), and waste elements of cerium (Ce), cesium (Cs) were estimated by using XAFS measurement in soft X-ray region. Following results were obtained by XAFS measurements of prepared glass frit and simulated waste glass samples: (1) The existence ratio of four coordinate sp
structure (BO) tends to increase with increasing NaO content in glass samples. (2) The height of a pre-edge which appears by K-edge XANES spectrum of O is so high that the Fe content in glass samples. Following results were obtained by XAFS measurements of simulated waste glass samples after immersion test to investigate long chemical stability. (1) The existence ratio of four coordinate sp structure (BO) increases by immersion test. (2) Ce which exists in the surface layer is oxidized by immersion test, and much of Cs in surface layer is lost after leach testing. Even if the glass frit form (fiber cartridge or beads) and manufacturing method were changed and a glass sample of the similar chemical composition was prepared, these observed Raman spectra of samples were different.
Nagai, Takayuki; Sasage, Kenichi; Okamoto, Yoshihiro; Shiwaku, Hideaki; Yamagishi, Hirona*; Ota, Toshiaki*; Inose, Takehiko*; Sato, Seiichi*; Hatakeyama, Kiyoshi*; Takahashi, Tomoe*; et al.
JAEA-Research 2019-003, 94 Pages, 2019/09
JAEA-Research-2019-003.pdf:7.92MB
The local structures of glass-forming elements and waste elements would change by the chemical composition of waste glass including those elements. In this study, simulated waste glass samples were prepared from borosilicate glass frit including phosphorus (P) or vanadium (V), and we investigated local structures of boron, sodium, and waste elements in these P glass and V glass samples by using synchrotron XAFS measurements in soft and hard X ray region.
Nagai, Takayuki; Okamoto, Yoshihiro; Shiwaku, Hideaki; Inose, Takehiko*; Sato, Seiichi*; Hatakeyama, Kiyoshi*; Hirono, Kazuya*; Homma, Masanobu*; Kobayashi, Hiromi*; Takahashi, Tomoe*; et al.
JAEA-Research 2018-007, 87 Pages, 2018/11
JAEA-Research-2018-007.pdf:61.21MB
To select the chemical composition of a glass frit which can increase the waste content, the simulated waste glass samples prepared from a borosilicate glass frit including vanadium (V) were investigated by using Laser Ablation (LA) ICP-AES analysis, Raman spectrometry, and synchrotron XAFS measurement in this study on foundation business of the Agency for Natural Resources and Energy.
Nagai, Takayuki; Kobayashi, Hidekazu; Shimamura, Keisuke; Oyama, Koichi; Sasage, Kenichi; Okamoto, Yoshihiro; Shiwaku, Hideaki; Yamanaka, Keisuke*; Ota, Toshiaki*
JAEA-Research 2018-005, 72 Pages, 2018/09
JAEA-Research-2018-005.pdf:28.2MB
Addition of radioactive waste to a borosilicate glass frit affects the local structures of glass-forming elements and waste elements in a waste glass produced in a vitrification process. In this study, simulated waste glass samples were prepared from borosilicate glass frit including phosphorus pentaoxide, and we investigated local structures of sodium (Na), boron (B), and waste elements in these glass samples by using synchrotron XAFS measurements in soft and hard X ray region.
Nagai, Takayuki; Akiyama, Daisuke*; Sato, Nobuaki*
Busshitsu, Debaisu Ryoiki Kyodo Kenkyu Kyoten Kenkyu Seika Hokokusho (Heisei-29-Nendo) (CD-ROM), 1 Pages, 2018/04
no abstracts in English
Nagai, Takayuki; Kobayashi, Hidekazu; Sasage, Kenichi; Ayame, Yasuo; Okamoto, Yoshihiro; Shiwaku, Hideaki; Yamanaka, Keisuke*; Ota, Toshiaki*
JAEA-Research 2017-005, 54 Pages, 2017/06
JAEA-Research-2017-005.pdf:16.17MB
Addition of radioactive waste to a borosilicate frit affects the local structures of boron (B) and waste elements in a waste glass. Synchrotron XAFS measurement was applied to investigate the local structural changes by using simulated waste borosilicate glass samples. Following results were obtained by the B K-edge XAFS analysis. It was confirmed that B K-edge XAFS analysis enables us to discriminate sp
type boron (BO) from sp type boron (BO). Addition of waste elements to a glass frit increases the percentage of BO and decreases that of BO. By decreasing the SiO/AlO ratio or increasing the (SiO+BO)/AlO ratio in the glass composition, the BO percentage increases and the BO percentage decreases. Addition of PO decreases the BO percentage and increases the BO percentage. Following results were obtained from XAFS measurement of the waste elements. Cerium (Ce) valence is more reduced with the increase of the BO content. Addition of PO has a tendency to reduce the Ce valence and to enhance deposition of Zr oxide. Deposition of ruthenium compounds separated from glass phase can not be improved by changing the BO content. This study was performed as a part of the project, "Improvement of vitrification process of high-level radioactive liquid wastes" on the foundation business of the Agency for Natural Resources and Energy.
Nagai, Takayuki; Kobayashi, Hidekazu; Sasage, Kenichi; Ayame, Yasuo; Okamoto, Yoshihiro; Shiwaku, Hideaki; Matsuura, Haruaki*; Uchiyama, Takafumi*; Okada, Yukiko*; Nezu, Atsushi*; et al.
JAEA-Research 2016-015, 52 Pages, 2016/11
JAEA-Research-2016-015.pdf:37.48MB
The local structure of waste elements in simulated waste glasses including V was estimated by using synchrotron XAFS measurement in this study. The results are as follows. (1) V has a high possibility which exists in the glass phase in the case of frit, and V can regard both samples as stable 4 coordination structure. (2) Zn, Ce, Nd, Zr, and Mo exist in the glass phase, and the difference is admitted by the percentage of Ce(III) and Ce(IV) by the composition. (3) Ru is separated from the glass phase as RuO crystalline, both of metal and oxide exist in Rh, and Pd is separated out as metal. (4) It was confirmed that the regularity of the local structure of Zr and Mo in the molten glasses retreats as a result of the XAFS measurement at high temperature. (5) The XAFS measurement of molten glasses were performed at 1200
C, so it would be possible to acquire excellent data by improving the shapes of the sample cell.
Nagai, Takayuki; Kobayashi, Hidekazu; Okamoto, Yoshihiro; Uehara, Akihiro*; Fujii, Toshiyuki*
Photon Factory Activity Report 2015, Part B, 2 Pages, 2016/00
To investigate the characterization damage of a borosilicate glass by a neutron irradiation, the glass sample after neutron irradiation was estimated by using the Raman spectrophotometry and the synchrotron XAFS measurement. As a result, we confirmed that the Si-O bridge structure of a borosilicate glass and the containing element valence in the glass were changed by the neutron irradiation.
generation by reaction with Ru-La-Na mix nitrates and raw materials for vitrificationNagai, Takayuki; Kobayashi, Hidekazu; Okamoto, Yoshihiro; Sato, Nobuaki*; Inose, Takehiko*; Sato, Seiichi*; Hatakeyama, Kiyoshi*; Seki, Katsumi*
no journal, ,
It is thought that a generated ruthenium compound grows from a high level radioactive liquid waste into RuO crystal by reacting to raw materials for the vitrification process. In this study, the generation reaction to RuO was confirmed by heating Ru-La-Na mix nitrates and the raw materials.
Nagai, Takayuki; Kobayashi, Hidekazu; Okamoto, Yoshihiro; Seki, Katsumi*; Kobayashi, Hiromi*; Homma, Masanobu*; Hatakeyama, Kiyoshi*
no journal, ,
It is expected by bubbling operation of molten glass that glass composition becomes uniform. Air or Ar gas was purged into the molten simulated waste glass, and the drained glass was investigated by Raman spectrophotometry and synchrotron XAFS measurement. As a result, the Si-O bridging structure with a small number of non-bridging oxygen increases by Ar gas purging into the molten glass and also valence of Ce included in the simulated waste glass reduces.
Nagai, Takayuki; Kobayashi, Hidekazu; Okamoto, Yoshihiro; Uehara, Akihiro*; Fujii, Toshiyuki*
no journal, ,
To investigate the characterization damage of a borosilicate glass by a neutron irradiation, the glass sample after neutron irradiation was estimated by using the Raman spectrophotometry and the synchrotron XAFS measurement. As a result, we confirmed that the Si-O bridge structure of a borosilicate glass and the valence of containing cerium in the glass were changed by the neutron irradiation.
Yamanaka, Keisuke*; Nagai, Takayuki; Ota, Toshiaki*
no journal, ,
For understanding the fundamental knowledge in the vitrification process of radioactive waste, the local structure of boron of simulated waste glass was investigated by using the XAFS measurement in BL-11 of Ritsumeikan University SR Center.
meltNagai, Takayuki; Okamoto, Yoshihiro; Inose, Takehiko*; Akiyama, Daisuke*; Sato, Nobuaki*
no journal, ,
A supplied high level liquid waste into the glass melter is formed to the mixed nitrate salt after the dehydration. In this study, NaNO which is a main ingredient in the waste was selected by the solvent, and NaNO sample including Ru was prepared, and the redox behavior of Ru in NaNO melt was measured by the Cyclic Voltammetry. And valence of Ru included in solidified salt was estimated by the synchrotron XAFS measurement.
) solution-NaNO-Glass frit by XAFS measurementNagai, Takayuki; Kobayashi, Hidekazu; Okamoto, Yoshihiro; Akiyama, Daisuke*; Sato, Nobuaki*
no journal, ,
no abstracts in English
Nagai, Takayuki; Kobayashi, Hidekazu; Okamoto, Yoshihiro; Shiwaku, Hideaki; Akiyama, Daisuke*; Sato, Nobuaki*
no journal, ,
no abstracts in English
Nagai, Takayuki; Okamoto, Yoshihiro; Akiyama, Daisuke*; Sato, Nobuaki*
no journal, ,
no abstracts in English
Nagai, Takayuki; Okamoto, Yoshihiro; Yamanaka, Keisuke*; Ota, Toshiaki*
no journal, ,
no abstracts in English
